Planning a Commercial Brick Facade Upgrade? When to Hire a Masonry Contractor

Masonry contractor inspecting a commercial brick facade during an exterior building renovation

A masonry contractor usually joins a commercial facade project after the design is drawn, the budget is set, and the brick is picked. That’s often too late. By then, the drawings may call for details that are hard to build, brick that has a long lead time, or a heavier wall than the building can carry without changes.

Facade upgrades touch everything from tenant access to water control. A good one makes a building look newer and perform better. Bring a masonry contractor in early, check the existing wall honestly, and plan the work around the people who use the building every day.

Masonry Contractor Review of Existing Brick Facade Conditions

Start with what’s already on the wall. Cracks, spalled brick, failed sealant joints, white staining from water, and rust stains near windows all point to issues that need attention. Covering them with new brick or a coating without fixing the cause usually leads to bigger problems later.

A masonry contractor can walk the facade and spot many of these issues. Some problems hide behind the brick, like corroded ties, rusted lintels, or missing flashing. Small inspection openings may be needed to see what’s really going on inside the wall.

Bring in a structural engineer if you see bowing, large cracks, or brick pulling away from the building. Those signs can point to structural issues that need a design solution. The masonry contractor and engineer should compare notes before the upgrade plan is final.

When to Involve a Masonry Contractor in Facade Planning

The best time is during early design, before drawings are finished. A masonry contractor can review details for how they’ll actually be built. That review often catches problems that are cheap to fix on paper and expensive to fix on scaffolding.

Early input helps with materials too. Some brick colors and shapes have long lead times. Matching existing brick on an older building can take time and samples, and the contractor can help you see what’s realistic.

Ask for a mockup panel on larger projects. A small sample wall built on site lets the owner and architect see the brick, mortar color, and joint style together. It’s far easier to adjust a mockup than a finished wall.

Coordinating Facade Designs and Structure With a Masonry Contractor

New brick adds weight. Full-size brick veneer is much heavier than thin brick or many other cladding systems. The building has to support that weight at the foundation, at floor lines, and over openings.

Support details matter. Shelf angles, lintels, and ties hold the brick to the building and carry its load. These should be designed by the project’s engineer and architect based on the building, the facade system, and local code.

The masonry contractor’s job is to build those details correctly and flag anything that won’t work in the field. Ask how they’ll handle transitions at windows, doors, roof edges, and storefronts. Those are the spots where design and construction most often clash.

Addressing Moisture Control and Expansion Joints During Installation

Brick walls get wet. A well-built facade lets water in, then sends it back out through a drainage path. That path usually includes an air space behind the brick, flashing at key points, and weep openings that let water escape.

Flashing goes at the base of the wall, over windows and doors, and at shelf angles. If it’s missing or installed wrong, water can sit in the wall and damage the backup structure. Ask your masonry contractor how they’ll keep the drainage path clear of mortar droppings during construction.

Brick also moves. Clay brick tends to expand slowly over time, and temperature changes add more movement. Expansion joints give the wall room to move without cracking, and their locations should be shown on the drawings. These joints should be filled with the right sealant, never with mortar.

Scheduling Masonry Contractor Work Around Building Operations

Commercial facade work happens around people. Tenants, customers, deliveries, and emergency access all need to keep moving. Planning the schedule early prevents a lot of frustration.

Talk through these items with your masonry contractor and general contractor:

  • Which elevations will be worked on first
  • How entrances and storefronts stay open and safe
  • Where scaffolding, lifts, and material storage will go
  • Allowed work hours and noise limits
  • Covered walkways or protection for pedestrians

Permits for scaffolding, sidewalk use, or street closures may be needed, and the rules vary by city and project scope. Weather matters too, since mortar needs suitable conditions to cure. Build some float into the schedule so a rainy week doesn’t throw off tenant move-ins or store openings.

Frequently Asked Questions

Can new brick be installed over an existing brick facade?

Sometimes, but it depends on the existing wall, the structure, and the new facade system. Adding a second layer of brick adds a lot of weight. The design team has to check support, ties, and drainage. Many projects remove damaged sections first instead of covering them.

How long does a commercial brick facade upgrade take?

Timing depends on building size, design, material lead times, and weather. Phased work around occupied buildings usually takes longer. Mockups and approvals add time up front. Ask your contractor for a schedule early in planning.

Is thin brick a good option for commercial facades?

Thin brick can work well on some projects. It’s lighter than full-size brick and may need less structural support. It also has its own installation methods and limits. Talk with your architect and masonry contractor about which system fits your building.